QUESTION · TUESDAY FOCUS

Is there any way to tie the transmitter into a pro mixing console with balanced outs? What's the feed?

ASKED BY · Douglas Carmichael · 23 SEP 2026 · ▶ 00:40:08

THE PANEL'S ANSWER
Brian Fisher

The transmitter accepts headphone-level output (3.5mm), not line level; users need a headphone amp between a pro console and the transmitter.

Summarised by AI from what the panel said. Watch the moment for the full answer.

IN THEIR OWN WORDS

From the transcript.

Machine-transcribed, so it may contain errors. Every timestamp opens the episode at that second.

39:59Douglas Carmichael asks through the QR code is there any way to tie the transmitter into a pro mixing console with balanced outs what's the feed so this accepts kind of a standard headphone output so it doesn't accept kind of line line output level so you would need to go through some type of headphone amp before arriving at the transmitter. So essentially the transmitter is designed to be able to plug it in

40:33the same place you would plug in a normal kind of passive pair of headphones. So is it a 3.5 millimeter or a quarter inch? 3.5 millimeter. 3.5 millimeter. So make your adaptive cables with that in mind. We include multiple cables and adapters for those as well. Oh, okay. So that's part of the kit. Great. All right, let's go to the next question.

40:59Here we have Rion Smith in Trinidad and Tobago asking, how is the sound rejection and noise cancellation? Is there active noise cancellation of these, or are they just relying on the fact that it's a closed headphone? There's no active noise cancellation, no. Good. They're isolated in the sense that you have the isolation of a closed back design that doesn't let sound leak out or helps kind of block out outside sound.

READ THE FULL TRANSCRIPT →
MENTIONED IN THE ANSWER
balanced audio→
ALSO IN THIS EPISODE

21 more questions
from LEWITT LW6: Wireless Headphones for Audio Professionals.

The whole episode →
▶ 00:14:56If you remain close to the unit, it will keep the latency low. What happens if you go a bit further? How much running room do you have here?▶ 00:16:08How about multiple musicians in studio, some needing to share the same mix, others their own, without having one transmitter per headphone? Can you do a couple of sets off of something?▶ 00:19:56What is the history of Lewitt and how did the idea for these come about?▶ 00:26:43The specs appear to treat real sound, Bluetooth, USB-C, and analog as separate modes. Can the LW6 stay connected to multiple sources at once? And if so, can you switch between them or actually mix them?▶ 00:28:02I believe you mentioned being able to use the wireless and analog interfaces on the transmitter simultaneously. Is there a difference in latency between the two when both interfaces are used?▶ 00:29:12Are the batteries replaceable? What is the runtime if being used at full volume?▶ 00:30:06In your YouTube video top 10 tips for recording vocals in your home studio you mentioned number four dial in your headphone mix. Can you expand on that here?▶ 00:31:00Since DSP is built right in the headphones themselves, all four inputs, real sound, Bluetooth, USB-C, and analog modes get the same treatment, correct?▶ 00:31:52What professional workflow do you think is the best match for the LW6's combination of low latency wireless and multiple input options?▶ 00:39:12Have you guys done any thinking about onset location audio? Can one transmitter go to many headphone receivers or is it only a couple of pairs?▶ 00:41:06How is the sound rejection and noise cancellation? Is there active noise cancellation of these or are they just relying on the fact that it's a closed foam headphone?▶ 00:42:21Are these headphones comfortable to wear with glasses? I've had problems in the past with headphones.▶ 00:43:10Can you elaborate on setting up mics in a recording studio while wearing these? Might the engineer actually walk into the active studio while wearing these to change the sound?▶ 00:44:27Is there a cushion option for hot and humid environments? My 7506 is getting sticky, and my Sennheiser HD 25-1-2s came with velour.▶ 00:45:24If I'm feeding the transmitter with a pro headphone amp like an RND-RNHP, would I turn the volume knob on the amp to max and control the volume at the headset? Do you have to learn gain structure for these?▶ 00:47:32If using them wirelessly in a situation where your signal chain includes side tone (one's own voice in the mix), would the single-digit millisecond latency be perceptible or distracting for some users?▶ 00:49:23What adapters are included with the LW6 package?▶ 00:49:57Is it a standard wireless connection or through a proprietary dongle? What frequency band is it in?▶ 00:50:23What's the most popular Lewitt mic? About how many mics are in the Lewitt catalog?▶ 00:52:14Where should people take a look to find Lewitt products? What are your retail outlets or online outlets?▶ 00:53:49Is the LW6 in the supply chain already? What's the shipping status?